Tag: connectx3

Mellanox ConnectX-3 metal brackets (WHL #42F2)

No real content this week, just a quick PSA that metal brackets for the ConnectX-3 MCX311A-XCAT 10GbE cards are now available from Chinese sources at very reasonable prices.
The former 3D printed bracket(s) worked fine for more than three years, but always stood out and also required a longer screw due to the material thickness. Finally someone is selling these as metal parts – I don’t think they are original ones as they could be deburred a bit better, but as long as they fit, it’ll do. Available on eBay from multiple sellers already, mine was 4.39 USD including shipping and local 19% VAT. […]


Mellanox ConnectX-3 3D printed brackets (WHL #42F1)

Looks like I got a project out of the 10GbE card thing

I have to admit that I was wrong in that post – the 3D model of the bracket over at servethehome doesn’t entirely fit the ConnectX-3 MCX311A. It’s for the higher-end dual cards (that I knew) with QSFPs (that I didn’t check). These are larger in physical footprint, so the bracket does fit by chance, but there’s empty space towards the PCIe connector. Also, because of the dual port architecture, these have their second mounting point shifted up higher, which means the second mount doesn’t even meet the PCB. […]


Mellanox ConnectX-3 MCX311A-XCAT 10GbE and Solaris 11.3 (WHL #42)

The heat. F*ck me.

I think post #42 deserves something nerdy. More nerdy than usual. Glad to report that I just bought something suitable – two Mellanox SFP+ cards (MCX311A-XCAT), capable of 10GbE over fibre (IEEE 802.3ae) and per DAC cables (not even sure which 802 that is – 802.3ak is Twinax as used in DAC, but thats quad-Twinax as used in CX-4 connectors, like Infiniband does). 55.00€ delivered from the Netherlands, as fast network connections are “Neuland” in Germany and therefore carry a heavy premium. Slap on some 1.5m of compatible FS.com […]