Ender 5 Plus and the dimmable Lightbox (#E21F2)
A couple of prints later and the lightbox printer is now contained in the intended footprint, with no external spool holder needed anymore. A simple roll with pockets for two bearings, a piece of an old M10 threaded rod, a couple of nuts and spacers, and a small mechanical adapter to make everything fit onto the original Ender holder was all it needed. The LED panels are now connected via XT30 connectors, and a 1-to-3 adapter for these mates with the DC step-up that still needs to be integrated. Not sure if I should use the integrated 24V power supply (as that is maxed out when printing) or add another desktop power brick, and how to (nicely) integrate the dimmer circuit that is just a significantly extended potentiometer from the DC-DC converter. […]
1. Check "Region und Sprache" in the system menu, https://en.easybell.de/help/questions/questions-concerning-the-telephone-connection/answer/how-can-i-change-the-language-of-my-fritzbox-to-english/ 2. Interesting question. I'd say that should be possible with…