Tag: x9srw

Supermicro X9SRW-F Ivy Bridge EP compatibility comparison (#P33)

Some canned content for today – back when making the Supermicro 2011 board fit my needs (#P23,#P24), I stumbled upon the Ivy Bridge thing. Technically, the two rack servers that I got should both be compatible with the E5-2600 series (Sandy Bridge EP), as well as E5-2600v2 series (Ivy Bridge EP). The product website states that “BIOS version 3.0 or above is required” for this to work, and both boards run the most recent version (not that there’s so many versions to choose from). Both had a E5-2630L installed, so SB-EP. […]


Supermicro X9SRW-F small riser mounting adapter (#P24)

More fun with the Supermicro X9SRW (and we’re still not done yet!)

The two X9SRW machines that I got had the same CPU and RAM situation, but one of them was in a 815 (1U) case, and the other one still is in a 825 (2U) one. I scrapped the noisy 815 for my board and allocated the more spacious 825. Fans are not the only thing that differs, though, as the added height also caused Supermicro to exchange the riser card for a different one. While the top riser is just an angled PCIe x8 connector (high up to make room for some heat sinks underneath), the bottom one is a WIO type that distributes 32 lanes in total. […]


Fitting a proprietary Supermicro X9SRW-F into a standard 3U 836 case (#P23)

Blogging’s a bit tedious right now, as shipping parts is rather slow at the moment, and there’s so much going on at work…

This has been in the making for the past two months now. Some very nice dude gave away “old” servers at a popular German hardware forum, but requested local pickup due to the difficult and expensive shipping of entire server chassis. These were decommissioned colocation servers from his own business, aged 7 to 12 years and no longer viable for 24/7 operation – still decent machines for occasional use. […]