Tag: thingiverse

Supermicro X9SRW-F small riser mounting adapter (#P24)

More fun with the Supermicro X9SRW (and we’re still not done yet!)

The two X9SRW machines that I got had the same CPU and RAM situation, but one of them was in a 815 (1U) case, and the other one still is in a 825 (2U) one. I scrapped the noisy 815 for my board and allocated the more spacious 825. Fans are not the only thing that differs, though, as the added height also caused Supermicro to exchange the riser card for a different one. While the top riser is just an angled PCIe x8 connector (high up to make room for some heat sinks underneath), the bottom one is a WIO type that distributes 32 lanes in total. […]


3D printed custom tool holders for my workbench (#P21)

Printing time, folks.

I recently had the urge to declutter my work bench. I usually prefer buying tools with proper holders, cases, mounting hooks, you name it. Some however are not offered with one (KS Tools 5.5mm/M3 ratchet wrench! Everything larger is part of the holder), some are only part of my collection (a set of Torx screw drivers T7-T20, so not including T5/T6/T25/T30), and some are one piece only, e.g. calipers. That stuff amassed over the last couple of years and it was time to get that sorted. The table was blocked for no good reason.

So I did. […]


3D models now available on thingiverse (#E12)

Quick note mixed with a bit of a “this is stupid” rant – as there’s quite a bit of 3D models coming in the near future (say…1.5 meters of them), I decided to put that stuff on thingiverse as well. It’s still hosted and linked here on this blog, but having it duplicated on an easy-to-search platform like thingiverse might be helpful for people with limited Google-fu. It’s also a nice source of somewhat standardized renderings from those parts, which I exploited in the previous post already.

Now to the “stupid! […]


MikroTik wAP ac door jamb bracket (#P16)

$ThingsIWantedToDoForALongTimeButDidntUntilIPaintedMyLivingRoom++;

When upgrading my laptop to the QCA9880 3x3ac card, I had the need for an 3x3ac access point. I went for the MikroTik wAP ac at the time, my first dedicated AP, as I always was a FritzBox AIO dude. In the card review I said I wasn’t planning on in-depth reviewing the AP, but I still need to scratch a little on the surface here, literally.

The AP is sitting next to the excellent FritzBox 7362SL and in fact is sharing the power supply with it. As the MikroTik is a PoE device, it doesn’t have a fixed input voltage; instead, it’s a 11-57 V wide input (“12W max”). […]