Tag: pliers

3D printed custom tool holders for my workbench (#P21)

Printing time, folks.

I recently had the urge to declutter my work bench. I usually prefer buying tools with proper holders, cases, mounting hooks, you name it. Some however are not offered with one (KS Tools 5.5mm/M3 ratchet wrench! Everything larger is part of the holder), some are only part of my collection (a set of Torx screw drivers T7-T20, so not including T5/T6/T25/T30), and some are one piece only, e.g. calipers. That stuff amassed over the last couple of years and it was time to get that sorted. The table was blocked for no good reason.

So I did. […]


Mini-Type Self-Adjustable Six Mandrel Ratchet HSC8 6-6 Crimper Plier For Wire Terminal Connector 0.25-6mm2 Multi Hand Tools (WHL #40)

Software stuff aside, back to hardware. And by hardware, I actually mean hardware. Tools. Let’s check out some crimping pliers for wire ferrules. Automatik-Aderendhülsenpresszangen, as we Germans like to say. :lol:

The unit in review was bought late February on AliExpress for 14.94€ including shipping (which took only around two weeks). When I showed it at work, I needed to order another one with the same specifications (14.89€ in early April, delivery took 3 weeks) and one with four mandrels, but 10mm² capability (HSC8 family as well, 12.13€ mid-March, two weeks). […]