Tag: torx

3D printed custom tool holders for my workbench (#P21)

Printing time, folks.

I recently had the urge to declutter my work bench. I usually prefer buying tools with proper holders, cases, mounting hooks, you name it. Some however are not offered with one (KS Tools 5.5mm/M3 ratchet wrench! Everything larger is part of the holder), some are only part of my collection (a set of Torx screw drivers T7-T20, so not including T5/T6/T25/T30), and some are one piece only, e.g. calipers. That stuff amassed over the last couple of years and it was time to get that sorted. The table was blocked for no good reason.

So I did. […]


33pcs Security Bit Set with Magnetic Extension Bit Holder Tamper Star Screwdriver Bits Set (WHL #52)

Ever had problems removing second-gen security screws, you know, those with the asymmetrically placed security pin? “No”, you say, these don’t exist?

Well…that might be true, but AliExpress already has bits for it. Bought in mid-August for 3.75€, fully refunded after my complaint.

Comes as a really dense item packaged in the usual grey plastic envelope thingy. Mould quality beyond scrap, bottom piece is held in shape by the bits for the most part. Well, will do as a free bit holder for my existing bits, always hard to complain about freebies. […]