Tag: acetone

Qbrick System PRO Toolcase foam inlay (WHL #113)

Back after a short training week for work in Köln, and some additional 2000km all over the Ruhr area, the Netherlands, and some B-roads in Belgium. While I prepared videos for my Beach Buggy channel, I simply was too lazy to do the same here, oops :)

Today’s post is about a small box from the Qbrick system (https://www.qbricksystem.com), specifically the toolcase from their “Pro” lineup. We have one of their larger boxes at work for 3D printer filament storage under low-humidity conditions, as recommended by a coworker. The large boxes are really sturdy, and, if one has the space, are genuinely worth their price. […]

12th October 2025 12th October 2025 By Bzzz In No Comment

3D printed custom tool holders for my workbench (#P21)

Printing time, folks.

I recently had the urge to declutter my work bench. I usually prefer buying tools with proper holders, cases, mounting hooks, you name it. Some however are not offered with one (KS Tools 5.5mm/M3 ratchet wrench! Everything larger is part of the holder), some are only part of my collection (a set of Torx screw drivers T7-T20, so not including T5/T6/T25/T30), and some are one piece only, e.g. calipers. That stuff amassed over the last couple of years and it was time to get that sorted. The table was blocked for no good reason.

So I did. […]

23rd February 2020 23rd February 2020 By Bzzz In No Comment