Printing time, folks.

I recently had the urge to declutter my work bench. I usually prefer buying tools with proper holders, cases, mounting hooks, you name it. Some however are not offered with one (KS Tools 5.5mm/M3 ratchet wrench! Everything larger is part of the holder), some are only part of my collection (a set of Torx screw drivers T7-T20, so not including T5/T6/T25/T30), and some are one piece only, e.g. calipers. That stuff amassed over the last couple of years and it was time to get that sorted. The table was blocked for no good reason.

So I did. […]