Tag: short circuit

3D printed custom tool holders for my workbench (#P21)

Printing time, folks.

I recently had the urge to declutter my work bench. I usually prefer buying tools with proper holders, cases, mounting hooks, you name it. Some however are not offered with one (KS Tools 5.5mm/M3 ratchet wrench! Everything larger is part of the holder), some are only part of my collection (a set of Torx screw drivers T7-T20, so not including T5/T6/T25/T30), and some are one piece only, e.g. calipers. That stuff amassed over the last couple of years and it was time to get that sorted. The table was blocked for no good reason.

So I did. […]


CITYSAX 160Ah LiFeYPO4 battery discharge and teardown (WHL #51)

Speaking of electric cars: A colleague recently bought a used electric car and (obviously!) contacted me in order to diagnose/troubleshoot it. Sadly he was able to sell it for a profit before we got it fully fixed, so no live data recordings, no power/torque graphs, no nothing to show here. But he left me a dead cell for which he got a replacement from the seller right away, as the traction battery had voltage dips under load that indicated (at least) one damaged cell.

If servicing individual battery cells sounds a bit strange for a modern electric car, that’s because we’re talking about a CITYSAX from a company that is conveniently named the same. […]