Tag: discharge curves

26650 LiFePO4 8S battery pack with BMS (WHL #27)

This weeks article is another by-product of the ADC testing (WHL #26) from last week. Could’ve packed in there, but I wanted to share some remarks on Chinese battery technology…

So first of all, this isn’t a piece of kit that I bought myself. After testing two 12V/2.2Ah lead batteries from work that were sitting unused on a shelf for five years, I needed another victim. Those quality Panasonic cells were flat as Kansas – the LC-R122R2PG datasheets recommends 8.6V cutoff voltage at 3C = 6.6A or 9.7V at 1C. Fully charged, they delivered 1C at 7V or 1.5C […]


A beefy electronic load (#P4F2)

Hello again!

I’ve been asked: What do you do with this electronic load thing? Well, I‘ve been using it as a battery torture device, what else could you do with a variable resistance device…

For a crude first step in actually testing my unit and also classifying a newly harvested set of deeply discharged 18650 cells, I slapped together some minimalistic Arduino program and hooked the thing up in parallel to the battery under test. The electronic load was set to 2 Amps with another battery, which was monitored by the Uni-T 203A current clamp. […]