Tag: reference voltage

16 Bit I2C ADS1115 Module ADC 4 channel with Pro Gain Amplifier RPi (WHL #26)

Meep. We finally have a new product review, after all that editorial, recap and electronic load rubbish ;)

Today’s item in the mail is an I²C ADC on a small PCB, running four channels (or two differential ones) with 16 bit precision. Sounds nice? Well, if it holds the claimed specs, it IS a nice product! I bought it in mid-June on AliExpress for 2.06 USD. Adafruit, by the way, charges 15 bucks for the exact same thing. Do I smell profit margin?

Here’s how it looks straight out of the ESD bag:

Backside is a tad boring (keep the VDD in mind):

(there’s a floating island on the GND plane, boo!) […]


A beefy electronic load (#P4F2)

Hello again!

I’ve been asked: What do you do with this electronic load thing? Well, I‘ve been using it as a battery torture device, what else could you do with a variable resistance device…

For a crude first step in actually testing my unit and also classifying a newly harvested set of deeply discharged 18650 cells, I slapped together some minimalistic Arduino program and hooked the thing up in parallel to the battery under test. The electronic load was set to 2 Amps with another battery, which was monitored by the Uni-T 203A current clamp. […]