Tag: bosch

Sensirion SGP30 and Bosch BME280 air sensors (WHL #64)

Small air sensor modules for today!

The Bosch BME280 has been in use on my ESP modules across the apartment since I discarded the unreliable DHT sensors, DHT22 in my case. It’s a combined temperature-pressure-humidity sensor, contrary to the much cheaper BMP280 or the predecessor BMP180, which lack the humidity part (pretty much vital indoors, while pressure is just a gimmick). They are sold in many similar versions, I’ve always picked the GY-BME280 module in 3.3V flavour (“GYBMEP”), as the sensor can be operated from 1.71V to 3.6V which is handy for different MCUs. […]


3D printed switch repair parts (#P31F1)

Some more details on the Bosch oven repair. These are the replacement parts that I ordered from Sculpteo, which, according to its own website, is the market leader in online ordered printed parts. Sculpteo also happened to be bought by BASF this spring, and they’re mainly printing in France but offer support in German (with offices in Germany, I think). They offer laser cutting as well but charge additional shipping cost for those, which made me skip parts of my order…

The part in question was already featured in WHL #61 (crappy automated model generation) after which I recreated it by hand. […]


Bosch Gourmet 8400 oven mode selector switch repair (Dreefs 4-DPS/260) (#P31)

A long, tedious blog post for today. This has been in the making for about 9 weeks and I’ve been looking for parts for another year or two. Pictures have been taken on multiple occasions in multiple locations, so it’s a hotchpotch that somewhat reflects the process. This is the use case for the 3D model generation of the WHL #61 post.

Our Bosch Gourmet 8400 microwave and baking oven has been there for as long as I can remember. It’s a huge and darn heavy thing for a microwave oven (27l volume!), and rather small for a baking oven with grill (broiler) functionality. […]


Bosch Professional GAA 18V-24 USB charging adapter 1600A00J61 1600A00J5W (WHL #49)

Something out of the ordinary for today, a brand new item, bought for disassembly and kind-of off-label use. A Bosch Professional USB charger which happens to have a 12V port also…

Contrary to my very first thought when I found this charger, it does NOT allow 18V batteries to be charged from USB or a 12V source. Maybe I should test that, but I doubt it. However, it does convert the other way – stick in a 18V power tool battery (ranging from 1.5Ah to 12Ah as of today) and get a USB charger with a lot of oomph, or a “heated jacked” power source with a lot of potential for baggy pockets. […]