Tag: panel mount

DIY USB Micro panel mount connector (#P13F1)

Oh yeah, that has been sitting around for a while…

Back in June there was a post about two connectors (#P13), and there was one more similar item that just happened to be printed a few days after that post. As far as I can tell, I never made a separate blog post about it.

Well, as there’s another short post coming later today, here’s that little item as a double whammy for today. The USB Micro-B panel mount bracket thingy.

Unsurprisingly it’s closely related to the regular USB-A panel mount case, just a little bit smaller to fit the female end of a USB Micro-to-Micro extension cord. […]

26th January 2020 26th January 2020 By Bzzz In 2 Comments

Hiland M644 Multifunctional Transistor Tester LCR Resistance Inductance Diode Capacitance ESR Frequency Meter PWM Signal Generator (WHL #50)

Another component for one of the upcoming projects – a refreshed transistor tester.

I’ve been using these for ages now, I actually built two of them before they got popular (what a hipster thing to say?) and every Chinese seller decided to roll his own. The original thread on mikrocontroller.net dates back to early 2012 and the SVN repository even contains a few fixes of mine to the manual, as I was proofreading this thing at the time.

Times have changed, and the ready made versions are so cheap nowadays that homebrew really doesn’t make any sense any more. […]

28th July 2019 26th January 2020 By Bzzz In No Comment

DIY USB and SATA panel mount connectors (#P13)

Next batch of connectors incoming! (yes, I’m onto something)

I bet most of you are familiar with USB panel mount connectors, which (I guess) are a by-product of the slot mounted USB ports of PC mainboards in the late 1990s, early 2000s. Back then, boards had none or few USB ports on their back I/O panel, but often one or two available via pin header. So people obviously needed some slot adapter for them, something like this:

If you slap on a different connector on the other end and omit the metal bracket, this is basically what you get these days when buying USB panel mount connectors. […]

10th June 2019 26th January 2020 By Bzzz In 4 Comments

DIY Phoenix VS-PSC style connector (#P12)

Okay okay, “project” is a big word for this. It’s a teeny tiny DIY thing, sparked from MOQ/packaging size worries of a rather unique connector.

In preparation of other things, I wanted access to the data lines of an USB port that is panel mounted. Just tinkerer stuff, you know, seeing if there’s any communication effort happening at all, being able to set current (allowance) sense resistors, you name it. I could have looped all wires to a second/third USB port and made an adapter for it, but that would be a lame one. Instead, I googled for IDC connectors, ideally female to allow easy resistor insertion, which can be panel mounted. […]

26th May 2019 26th May 2019 By Bzzz In No Comment